# @_flash.bin            | bootloader
# @_image   [_flash.bin] | image burn to nand, default is the same as bootloader
# @_filesystem           | filesystem to burn
# @_kernel               | kernel image
# @_dtb                  | dtb image

# This command will be run when i.MX6/7 i.MX8MM, i.MX8MQ
SDP: boot -f _flash.bin

# These commands will be run when use SPL and will be skipped if no spl
# SDPU will be deprecated. please use SDPV instead of SDPU
# {
SDPU: delay 1000
SDPU: write -f _flash.bin -offset 0x57c00
SDPU: jump
# }

# These commands will be run when use SPL and will be skipped if no spl
# if (SPL support SDPV)
# {
SDPV: delay 1000
SDPV: write -f _flash.bin -offset 0x11000
SDPV: jump
# }

FB: ucmd setenv fastboot_buffer ${loadaddr}
FB[-t 60000]: ucmd nand erase.chip
FB: download -f _image
FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize}
FB[-t 60000]: ucmd ubi part rootfs
FB[-t 60000]: ucmd ubi create root -
FB: download -f _filesystem
FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize}

FB: download -f _kernel
FB[-t 60000]: ucmd nand write ${loadaddr} kernel ${filesize}

FB: download -f _dtb
FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
FB: ucmd setenv loadaddr 0x82000000

FB: done