ENGICAM PX30-EDIMM2.2 carrier board
===================================
Build:
$ make engicam_px30_core_defconfig
$ make
Files created in output directory
---------------------------------
output/images
├── bl31.elf
├── idbloader.img
├── Image
├── px30-engicam-px30-core-ctouch2-of10.dtb
├── rootfs.ext2
├── rootfs.ext4 -> rootfs.ext2
├── rootfs.tar
├── sdcard.img
├── u-boot.bin
└── u-boot.itb
How to connect the board and get started:
-----------------------------------------
Ensure that the power supply is stable and provides enough current to handle
the board's needs, especially when peripherals are connected.
Insert micro SD card on the board micro SD slot J17
Creating bootable SD card:
--------------------------
sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
/dev/sdX is the path in host via which SD card is detected
Where X is your SD card device
Connect UART port on the board J26
Serial console
--------------
Launch minicom at host with 1152008N1
Power on the kit using J4
Refer link on checking board booting
Program eMMC
------------
Connect USB otg cable A-type to host pc, Micro USB end to board.
Close Jumper JM5.
Boot the Kit with SD boot.
Program eMMC in U-Boot. (Refer link for the steps)
Wiki link:
https://wiki.amarulasolutions.com/bsp/rockchip/px30/engicam-px30-edimm2.2.html
25a642683c