51 lines
1.5 KiB
Plaintext
51 lines
1.5 KiB
Plaintext
Texas Instuments SK-AM64 Test and Development Board
|
|
|
|
Description
|
|
===========
|
|
|
|
This configuration will build a complete image for the TI SK-AM64
|
|
board: https://www.ti.com/tool/SK-AM64.
|
|
|
|
How to Build
|
|
============
|
|
|
|
Select the default configuration for the target:
|
|
|
|
$ make am64x_sk_defconfig
|
|
|
|
Optional: modify the configuration:
|
|
|
|
$ make menuconfig
|
|
|
|
IMPORTANT: make sure to use the tiboot3 firmware that match with the TI
|
|
K3 SoC boot ROM (tiboot3-am64x-{gp/hs-fs/hs}-*.bin) used on the board.
|
|
|
|
HS-FS should be the default for all TI AM6x devices but earlier version
|
|
of TI starter kit EVMs for AM6x was produced with a GP device.
|
|
|
|
See further details on e2e Forum [1] :
|
|
|
|
"Unfortunately with this transition any existing GP device based AM62x
|
|
(and AM64x) boards will no longer boot with MMC/SD card images generated"
|
|
|
|
For such existing GP device based AM64x boards, users have to provide the
|
|
tiboot3.bin name using BR2_TARGET_TI_K3_R5_LOADER_TIBOOT3_BIN.
|
|
|
|
[1]: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1210443/faq-am625-generating-sitara-am62x-am62ax-am64x-gp-device-bootable-mmc-sd-card-images-using-sdk-v8-6-and-yocto
|
|
|
|
Build:
|
|
|
|
$ make
|
|
|
|
To copy the resultimg output image file to an SD card use dd:
|
|
|
|
$ dd if=output/images/sdcard.img of=/dev/sdX bs=1M
|
|
|
|
How to Run
|
|
==========
|
|
|
|
Insert the SD card into the SK-AM62 board, and power it up through the
|
|
USB Type-C connector. The system should come up. You can use a
|
|
micro-USB cable to connect to the connector labeled DEBUG CONSOLE to
|
|
communicate with the board.
|