47 lines
1.6 KiB
Plaintext
47 lines
1.6 KiB
Plaintext
Intro
|
|
=====
|
|
|
|
This default configuration allows to start experimenting with the Buildroot
|
|
environment for the OrangePi 5 Plus board. Default configuration brings up
|
|
the board and allows access through the serial console.
|
|
|
|
Orangepi 5 Plus links:
|
|
- http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-plus-32GB.html
|
|
|
|
Upstream support
|
|
================
|
|
|
|
Linux v6.12.x provides a good starting point for experiments with this board.
|
|
All the basic features are already enabled including all the basic low-speed
|
|
I2C/SPI/PWM peripherals, ethernet networking, USB 2.0, PCIe, eMMC, Audio.
|
|
However advanced features such as graphics, display controllers, multimedia
|
|
codecs, camera and image processing units are still in work. For details and
|
|
updates check RK3588 hardware enablement status at Collabora gitlab, see:
|
|
|
|
- https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3588/-/blob/main/mainline-status.md
|
|
|
|
Also keep an eye on RK3588 updates in kernel release announcements, e.g.
|
|
- https://kernelnewbies.org/Linux_6.12
|
|
|
|
How to Build
|
|
============
|
|
$ make orangepi_5_plus_defconfig
|
|
$ make
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
Once the build process is finished there will be an image called
|
|
"sdcard.img" in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX status=progress
|
|
$ sudo sync
|
|
|
|
Insert the micro SDcard into the Orangepi 5 Plus board and power it up.
|
|
The console is on the TTL Debug UART 3-pin connector which is located
|
|
near RTC connector and Type-C Power port.
|
|
|
|
Note that baudrate for this board is 1500000 8N1.
|