38 lines
970 B
Plaintext
38 lines
970 B
Plaintext
Intro
|
|
=====
|
|
|
|
This default configuration will allow you to start experimenting with the
|
|
buildroot environment for the Radxa ROCK 4SE. With the current configuration
|
|
it will bring-up the board, and allow access through the serial console.
|
|
|
|
Radxa ROCK 4SE link:
|
|
https://radxa.com/products/rock4/4se/
|
|
|
|
Wiki link:
|
|
https://forum.radxa.com/c/rockpi4
|
|
|
|
GPIO connector pinout link:
|
|
https://wiki.radxa.com/Rockpi4/hardware/gpio
|
|
|
|
This configuration uses mainline ATF, U-Boot and kernel.
|
|
|
|
How to build
|
|
============
|
|
|
|
$ make rock4se_defconfig
|
|
$ make
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
Once the build process is finished you will have an image called "sdcard.img"
|
|
in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
|
$ sudo sync
|
|
|
|
Insert the micro SDcard in your Radxa ROCK 4SE and power it up. The console
|
|
is available on UART2 on the GPIO connector, 1500000bps 8N1.
|